• -10%

TURBO AGITATOR BLADE MISCEO 650 - 420 mm

PC057
€554.40
€616.00
-10%
Tax excluded

Up to 4L

Quantity

• Suspension

• Dissolution

• Mixing

• Emulsion


Operating speed
70 to 300 R.P.M

16 other products in the same category:

DISSOLVER DISPERSION TOOL D60 1/9 - length 185 mm

€315.90 €351.00 -10%

The Dissolver/Dispersion Tool with medium/high shear is used at a medium to high speed in low viscosity fluids to reduce particle size and break down agglomeration (clumping of particles forming a mass). With a radial flow (drawing from both the top and the bottom) this medium/high shear tool creates high turbulence and is ideal for particle fragmentation and dispersion. Ideal in low viscosity for dissolution of powders, homogenous pigment dispersion and use with materials that are not shear sensitive. Once particle reduction and agglomeration break down has been achieved you may choose to continue with a lower shear tool such as the Turbo Agitator Tool, the Anchor Stirrer or the Spiral Stirrer for the remainder of your product.

ANCHOR STIRRER TOOL 1/9 - length 225 mm

€342.00 €380.00 -10%

The Anchor Stirrer is used at a low speed in high viscosity fluids. With a tangential flow (moving fluid horizontally around the vessel) the Anchor Stirrer will not break/damage sensitive materials and is ideal for the distribution of high mineral content in fluids. Suitable for emulsions, suspensions, gels, colour cosmetics. Can be used with products that contain large particles or beads that you do not want to be broken. With little vertical flow you may use the anchor stirrer at very low speed for higher viscosity surfactant formulations (shampoos, body washes etc) to minimise foaming.