- -10%
TURBO AGITATOR BLADE MISCEO 650 - 420 mm
Up to 4L
• Suspension
• Dissolution
• Mixing
• Emulsion
- Operating speed
- 70 to 300 R.P.M
16 other products in the same category:
DISSOLVER DISPERSION TOOL D60 1/9 - length 185 mm
The Dissolver/Dispersion Tool with medium/high shear is used at a medium to high speed in low viscosity fluids to reduce particle size and break down agglomeration (clumping of particles forming a mass). With a radial flow (drawing from both the top and the bottom) this medium/high shear tool creates high turbulence and is ideal for particle fragmentation and dispersion. Ideal in low viscosity for dissolution of powders, homogenous pigment dispersion and use with materials that are not shear sensitive. Once particle reduction and agglomeration break down has been achieved you may choose to continue with a lower shear tool such as the Turbo Agitator Tool, the Anchor Stirrer or the Spiral Stirrer for the remainder of your product.
MIXING 2 BLADES TOOL ALL STAINLESS STEEL MISCEO 250 - 160 mm
Mixing 2 blades
160 mm : PC012
190 mm : PC013
ROTOR STATOR TOOL MISCEO 650 - 300 mm
Mixing blades
PC051 : 400 mm
PC055 : 300 mm
EMULSIFIER HOMOGENIZER SUPPORTS FOR CONTAINERS FOR MISCEO 650 AND MISCEO 1100 - DIAM 1000 mm
Pan support brackets / fully removable
Special production, intensive use.
Stainless steel for food products for perfect hygiene.
Sturdy and convenient.
MIXING 2 BLADES TOOL MISCEO 250 - 190 mm
Mixing 2 blades
160 mm : PC012
190 mm : PC013
MIXING 3 BLADES TOOL MISCEO 650 - 300 mm
Mixing blades
PC051 : 400 mm
PC055 : 300 mm
ANCHOR STIRRER TOOL 1/9 - length 225 mm
The Anchor Stirrer is used at a low speed in high viscosity fluids. With a tangential flow (moving fluid horizontally around the vessel) the Anchor Stirrer will not break/damage sensitive materials and is ideal for the distribution of high mineral content in fluids. Suitable for emulsions, suspensions, gels, colour cosmetics. Can be used with products that contain large particles or beads that you do not want to be broken. With little vertical flow you may use the anchor stirrer at very low speed for higher viscosity surfactant formulations (shampoos, body washes etc) to minimise foaming.