- -10%
MOTOR BLOCK MISCEO 250 P
Including €0.05 for ecotax (not impacted by the discount)
•Mixing
• Beating
• Proliferation
- Output
- 250 W
16 other products in the same category:
MIXING 2 BLADES TOOL ALL STAINLESS STEEL MISCEO 250 - 160 mm
Mixing 2 blades
160 mm : PC012
190 mm : PC013
EMULSIFIER HOMOGENIZER SUPPORTS FOR CONTAINERS FOR MISCEO 650 AND MISCEO 1100 - DIAM 1200 mm
Pan support brackets / fully removable
Special production, intensive use.
Stainless steel for food products for perfect hygiene.
Sturdy and convenient.
VACUUM ROTOR STATOR TOOL MISCEO 250 - 160 mm
Vacuum Rotor stator tool
160 mm: PC014
190 mm: PC015
MIXING 4 BLADES TOOL MISCEO 650 - 410 mm
Mixing blades
PC051 : 400 mm
PC055 : 300 mm
ANCHOR STIRRER TOOL 1/9 - length 185 mm
The Anchor Stirrer is used at a low speed in high viscosity fluids. With a tangential flow (moving fluid horizontally around the vessel) the Anchor Stirrer will not break/damage sensitive materials and is ideal for the distribution of high mineral content in fluids. Suitable for emulsions, suspensions, gels, colour cosmetics. Can be used with products that contain large particles or beads that you do not want to be broken. With little vertical flow you may use the anchor stirrer at very low speed for higher viscosity surfactant formulations (shampoos, body washes etc) to minimise foaming.
TURBO AGITATOR TOOL 1/9 - 185 mm
Up to 4L
The Turbo Agitator Tool is an excellent all-round tool for most general low shear stirring requirements and ideal for using with shear sensitive materials and mixing surfactants. With an axial flow (drawing from the bottom to the top) it can be used from low speed through to high speed, for low through to medium viscosity fluids. When creating surfactant type products (shampoos, body washes) it is best to commence on low speed to minimise foaming. Medium to high speed is suitable for emulsions, suspensions, oleogels, cooldown phases and other products requiring general stirring.
Low Shear
Low to High Speed
Low to Medium Viscosity
Axial Flow
STATIF FOR MISCEO 250 F & MISCEO 300 F
This statif is intended to be associated only with the following MISCEO blockmotors : PC145 or PC165. Any other association shall make the person making the association responsible for compliance with the safety requirements in accordance with the regulations in force.
MIXING 3 BLADES TOOL MISCEO 650 - 300 mm
Mixing blades
PC051 : 400 mm
PC055 : 300 mm
MIXING 2 BLADES TOOL ALL STAINLESS STEEL - 190 mm
Mixing 2 blades
160 mm : PC012
190 mm : PC013
ROTOR STATOR TOOL MISCEO 650 - 300 mm
Mixing blades
PC051 : 400 mm
PC055 : 300 mm
LAB BENCH SERVOMIX SUPPORT COMPATIBLE FOR MISCEO 650 F AND MISCEO 1100 F
This statif is intended to be associated only with the following MISCEO blockmotors : PC145 or PC165. Any other association shall make the person making the association responsible for compliance with the safety requirements in accordance with the regulations in force.